The Kidde GSA-CT1 is a single-circuit input module for the Signature addressable loop. First, it supervises one normally-open initiating-device circuit (IDC). Then, the loop controller reports the IDC state as an addressable point.
In addition, the GSA-CT1 reads analog data from its input. As a result, the panel decides alarm, trouble, or normal based on the loop’s threshold and personality code.
How the Kidde GSA-CT1 Works
The GSA-CT1 plugs into a Signature mounting base. Then, the IDC is wired with end-of-line supervision per the panel’s wiring guide. Finally, the module reports state changes to the loop controller.
Furthermore, the personality code is downloaded at commissioning. As a result, the same module can act as alarm, supervisory, or monitor input depending on the application.
Typical Applications
- Conventional smoke or heat detector IDC tied to the addressable loop
- Waterflow switch input with supervised wiring
- Manual pull station IDC for a small zone
- Supervisory monitor point — valve tamper or low-air
Key Features
- One normally-open IDC input on the Signature loop
- Configurable for alarm, supervisory, or monitor function
- Supervised wiring with end-of-line resistor
- UL 38, UL 864, ULC-S527, ULC-S528, and FM3010 listed
- Compatible with Kidde / Vigilant / Edwards Signature loop controllers
Order the Kidde GSA-CT1
Life Safety Consultants stocks the GSA-CT1 alongside other Signature input and output modules. To confirm the right input module and personality code for your application, call 1-888-557-0558. Alternatively, email sales@lifesafetycom.com.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 0.3 lbs |
|---|---|
| Dimensions | 2 × 4.9 × 5.1 in |
| Condition | New |
| Manufacturers | Kidde |
| Part Type | Smoke Detector |
