Lenel (LNL-1200-S3) Output control module (series three) – 12/24 vdc, 16 relay output control module , rohs,

The Lenel LNL-1200-S3 is a Series 3 Output Control Module for the LenelS2 OnGuard access control platform. Specifically, it delivers 16 Form-C relay outputs for elevators, doors, alarms, and auxiliary control.

First, the OCM accepts commands from an Intelligent System Controller over RS-485. Then, it switches loads up to 5 amps at 30 VDC per output. As a result, integrators can drive auxiliary devices and elevator floor selects from one board.

In addition, the LNL-1200-S3 includes AES 128-bit and 256-bit encryption to protect commands on the panel bus. Furthermore, it supports elevator control for up to 128 floors. Therefore, large mixed-use buildings can scale floor-by-floor access without extra hardware.

Lenel LNL-1200-S3 Key Features

• 16 Form-C relay outputs rated 5 A at 30 VDC, resistive
• 2 unsupervised inputs dedicated to cabinet tamper and UPS fault monitoring
• 2-wire or 4-wire RS-485 with onboard termination jumpers
• DIP-switch selectable addressing
• Status LEDs for communication, heartbeat, and relay state
• Elevator control for up to 128 floors
• AES 128-bit or 256-bit encryption
• FCC Part 15, CE, RoHS, UL 294, UL 1076, ULC CSA-C22.2, CAN/ULC-S319-05 listed

Electrical and Physical Specifications

• Primary power: 12 to 24 VDC ±10%, 1,100 mA maximum
• Nominal current: 850 mA at 12 VDC; 450 mA at 24 VDC
• Outputs: 16 Form-C, 5 A at 30 VDC, resistive
• Communication: 2-wire or 4-wire RS-485, multi-drop
• Dimensions: 6 x 8 x 1 in (152 x 203 x 25.4 mm)
• Weight: 14 oz (400 g) nominal
• Operating temperature: 32°F to 158°F (0°C to 70°C)
• Storage temperature: -67°F to 185°F (-55°C to 85°C)
• Humidity: 0% to 95% RH non-condensing

Where the LNL-1200-S3 Fits in the OnGuard System

First, the OCM pairs with current LenelS2 Intelligent System Controllers like the LNL-3300 and LNL-X-Series. In addition, it interoperates with LNL-1100-S3 input boards and LNL-1320-S3 reader boards. As a result, integrators can build a full input/output/reader system on one Series 3 bus.

Order or Get Application Help

Life Safety Consultants stocks Lenel Series 3 modules for OnGuard expansions and replacements. To order the Lenel LNL-1200-S3 or to spec floor control for an elevator job, call 1-888-557-0558. Alternatively, email sales@lifesafetycom.com.

For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com